WMI Pump Kit


• High-pressure Diaphragm Pump
• Material: Durable HDPE/ABS Plastic, Rubber, Steel, Nickel Plated Brass
• Works on all Water-Methanol Injection Kits
• Compatible with AEM, Snow Performance, Devils Own, Cooling Mist, Aquamist, and all of the other kinds of Water/ Methanol Injection Kits
• Pressure adjustable from 100- 200 psi/ 6.8- 13.7 bar (comes preset at 160 psi/11 bar) ,
• %100 Methanol compatible and can be used for any alcohol-water mix.
• No pressure cut off switch eliminating any oscillation/pulsation
• Internally bypasses for a smooth constant even flow at the nozzle
• Self-priming up to 8 vertical feet
• Large 3/8th NPT female threaded compression-type ports (fittings shown in the picture, included)
• Nickel-plated compression type female elbow hose fitting 3/8th NPT to 1/4″ (6mm) hose
• Integrated built-in anti-reverse check valve
• 12 volt pulls 3.5 amp current draw
• Lower rpm motor avoid oscillation/ pulsation
• Lowest rpm water/ methanol injection pump – 60 RPM
• 60 LPH or 15.85 GPH
• Can be used with 30 volt electrical systems
• Can run dry up to an hour without damage


İnceleme (0)

Included: (Please indicate the fitting type. If you don’t we will send you a Straight Fitting.)

  1. High-Pressure Diaphragm Pump
  2. Straight/ Elbow/ Rotating Elbow Compression type 3/8″ NPT – 1/4″ (6mm) fitting


Henüz inceleme yapılmadı.

Sadece bu ürünü satın almış olan müşteriler yorum yapabilir.

Mesaj gönder
Nasıl yardımcı olabiliriz?